Maak uw selectie
Artikelcode: KTD-KST-WP2-K10
Schrijf als eerste een review voor dit product

K-Tuned swivel neck thermostaat (Honda K20 motoren)

Incl. 21% Btw
Voorraad en verzendinformatie information-circle

90% van de producten in onze shop liggen op interne of externe voorraad en hierdoor kunnen wij jouw order veelal spoedig verwerken (variërend van enkele uren tot een aantal werkdagen).

Uiteraard is het mogelijk dat een product een (onverwacht) lange levertijd heeft.
Na ontvangst van je bestelling, zullen wij je hierover informeren en bieden indien nodig eventuele beschikbare alternatieven aan. Houd je mailbox dus goed in de gaten.

Wij geven bewust achteraf voorraadinformatie over onze producten, omdat veel leveranciers geen systeem aanbieden om dit te kunnen koppelen en wij vooraf geen ''schattingen'' willen tonen zoals bij vele andere webshops, waar je helaas achteraf alsnog een andere/langere levertijd krijgt te horen dan stond aangegeven.
We willen jou alleen actuele informatie geven op het moment van verwerking van de bestelling, zodat we je niet hebben kunnen misleiden met een schatting.

Als je een product heel snel nodig hebt en je wil er zeker van zijn dat we het op voorraad hebben, e-mail of bel ons dan of stuur een bericht via ''stel een vraag over dit product'' onderaan de productbeschrijving.

IDEAL Riverty Bancontact Klarna Maestro Maestro Visa American Express American Express  American Express
DHL UPS PostNL DPD
Omschrijving
K-TUNED Swivel Neck Thermostat. Some of the motors we have received came with the oem plastic water neck broken. Until now, you could only order a replacement part from Honda/Acura. Problem is they only sell the housing complete with the thermostat, which is pretty expensive and it doesn't provide any real benefits. If your housing isn't broken then you still have to get the right hose, with the right angles and mate it to the rad. After that, you have to figure out where to put your fan switch and in the past the only option was to use a special inline aluminum hose adapter. This product solves all these problems and gives you some options when doing your swap. The housing swivels, allowing you to position the water outlet angle before it is tightened down. The provided custom made fitting is the same size as the oem rad hose on one end, and is threaded for an AN fitting on the other end. This allows you to use whatever size fitting you need for custom installations. If you want to use braided hose with AN fittings, this housing will bolt on easily and with the right adapter threaded in, you'll be all set. The housing has three ports in the body, one for your fan switch, a 1/8 NPT port for gauges etc. and also 1/2 NPT port for our optional recirculation fitting. 2 NPT plugs are included in case the ports remain unused. The swivel neck comes pre-assembled with a quality Stant thermostat (180 deg.) which is held in place with a 'C' clip. The kit uses a standard size thermostat that you can easily replace with anything in the 160-195 degree range. Last but not least, this was a bonus we found while designing it. We noticed that by adding one more hole to the flange you could completely remove the oem black plastic housing from the block and delete the heater core hoses. When set up this way, our thermostat housing is bolted directly to the oem aluminum water pump housing. This is perfect for race car applications.

- Fits both K20 & K24 engines
- Adjustable, set the rad hose at any angle
- Quality Stant thermostat included
- Fan switch port for engine swaps
- 2 aux. ports for gauges, etc.
- Easily deletes heater core hoses on race ars
- Threaded water outlet for custom setups
- All hardware included
Stel een vraag over dit product

Dit formulier wordt beschermd door reCAPTCHA - het Privacybeleid van Google en Servicevoorwaarden zijn van toepassing.

Schrijf je eigen review
Alleen geregistreerde gebruikers kunnen reviews schrijven. Log in of maak een account aan.