H-Gear Pro-Line centreerring set 64.1mm naaf (Universeel)

H-gear pignon rings

H-Gear pignon rings are designed to fill in the gap between the hub of the car and the center bore of the wheel.
Most wheel manufacturers design their wheels with a centerbore large enough to fit on most cars. Therefore, most wheel fitments have a gap between the hub and the centerbore. This gap usually doesn't allow for the wheel to fit hubcentric but rather lugcentric which causes vibration. Therefore, to fill the gap and ensure the fitment is hubcentric, pignon rings are used.

H-gear offers a large variety of pignon rings which will fit most Honda's.

Please select the bore size of the aftermarket wheel in the drop down menu in to recieve the correct rings.

The stated price is for a complete set of 4 rings.

Available sizes:

-67.1> 64.1
-69.1> 64.1
-70.1> 64.1
-70.4> 64.1
-72.5> 64.1
-73.0> 64.1
-74.1> 64.1
-76.1> 64.1

Difference between ''Pro-Line'' and ''Tuner line'' H-gear products?

The difference between an Tuner-line and Pro-line product has been created, so we can make 2 different collections in our own product range.
The Pro-Line is in general a slightly higher grade in a slightly higher price range, compared to the Tuner-line. Often noticable in the final finish and durability of the product.
This does not mean that the Tuner-line products are ''bad quality'' but are in general an affordable alternative for those who don't need the high grade of the Pro-Line products.