Schrijf je HIER in op onze nieuwsbrief en ontvang 5% KORTING op jouw bestelling!
Artikelcode
BXAC-00175

Blox Racing Extreme Ti64 Titanium Verlengde Wielbout M12x1.5 (universeel)

Incl. 21% Btw
€ 25,00

Klarna logo

Op voorraad

Omschrijving

We are proud to introduce a solution to common wheel stud failures - our new Blox Racing Xtreme Titanium Wheel Studs. These lightweight wheel studs are manufactured from aerospace grade Ti64 Titanium. We chose Titanium for our Xtreme line, because it is resistant to the constant heating and cooling cycles common to wheels that will destroy steel studs and bolts. Our Xtreme Wheel Studs will not corrode or rust and they offer 50% in weight savings over old school steel studs. Upgrade to our New Titanium Wheel Studs today and never get a failed stud again! 

FEATURES

  • Manufactured From Ti64 Titanium 
  • Reduce Rotational Mass
  • Corrosion & Fatigue Resistant
  • Each Extended Stud Weighs Approximately 34 Grams

WHEEL STUD SPECS

  • Thread pitch: 12x1.5mm
  • Total length: 78.85mm
  • Thread length: 58mm
  • Head diameter: 20mm
  • Base thickness: 2.85mm

WHAT YOU NEED TO KNOW:

> If you use our titanium studs and titanium lug nuts you must use generous amounts of anti-sieze to avoid galling.

Precision Ti64 spline results in no welding or spinning of the stud in the hub.

Each Extended Stud weighs 34 grams. Compare to the factory wheel stud weight of 37 grams and ARP wheel studs of 68+ grams.

Extended wheel studs are available in sets of 8, 10 and single piece set.

Single-piece wheel studs are available and are ideal for when replacing only a few old or damaged studs.

FYI: Wheel studs must properly be pressed in using a mechanical or hydraulic press.

Toon meer

Stel een vraag over dit product

Schrijf uw eigen review

Alleen geregistreerde gebruikers kunnen reviews schrijven. Log in of maak alstublieft een account aan. inloggen of maak een account aan

Omschrijving

We are proud to introduce a solution to common wheel stud failures - our new Blox Racing Xtreme Titanium Wheel Studs. These lightweight wheel studs are manufactured from aerospace grade Ti64 Titanium. We chose Titanium for our Xtreme line, because it is resistant to the constant heating and cooling cycles common to wheels that will destroy steel studs and bolts. Our Xtreme Wheel Studs will not corrode or rust and they offer 50% in weight savings over old school steel studs. Upgrade to our New Titanium Wheel Studs today and never get a failed stud again! 

FEATURES

  • Manufactured From Ti64 Titanium 
  • Reduce Rotational Mass
  • Corrosion & Fatigue Resistant
  • Each Extended Stud Weighs Approximately 34 Grams

WHEEL STUD SPECS

  • Thread pitch: 12x1.5mm
  • Total length: 78.85mm
  • Thread length: 58mm
  • Head diameter: 20mm
  • Base thickness: 2.85mm

WHAT YOU NEED TO KNOW:

> If you use our titanium studs and titanium lug nuts you must use generous amounts of anti-sieze to avoid galling.

Precision Ti64 spline results in no welding or spinning of the stud in the hub.

Each Extended Stud weighs 34 grams. Compare to the factory wheel stud weight of 37 grams and ARP wheel studs of 68+ grams.

Extended wheel studs are available in sets of 8, 10 and single piece set.

Single-piece wheel studs are available and are ideal for when replacing only a few old or damaged studs.

FYI: Wheel studs must properly be pressed in using a mechanical or hydraulic press.

Toon meer

Toepasbaar op:

Universeel
Toon meer

Gerelateerde producten

BLOX Racing Titanium Wielmoeren 12x1.5mm (Conisch) | BXAC-00131-X | A4H-TECH.COM

BLOX Racing Titanium Wielmoeren 12x1.5mm (Conisch)

Artikelcode: BXAC-00131-X
Vanaf € 438,00
Tip