Wilwood Forged 325mm Big Brake Kit rear red (S2000 99-09)

Big Brake Kits give your vehicle that Supercar look and feel, and exceed stock performance in two areas.
First, larger discs increase heat capacity. Second, stiffer calipers and stainless steel lines reduce system compliance.

The key, however, is to increase heat capacity and reduce compliance without upsetting the stock front to rear brake torque ratio. If the brake upgrade you select adds too much front torque (as many do), you reduce your car's ability to utilise the tractive capacity of all of the tyres to the maximum practical extent (even on ABS equipped cars) and you therefore create performance sacrifices. In addition, too many pistons or pistons that are too large will make the brake pedal much more difficult to modulate, which limits a driver's control of brake input on the race track.

Advantages of Wilwood over other brake upgrades:

- Shorter Stopping Distances
- Better Brake Modulation
- Firmer Brake Pedal
- Less Brake Fade

Rear brake kit

Combination hydro-mechanical Parking Brake calipers use hydraulic pressure from the master cylinder for stopping power, and an internal mechanical lock within the caliper for a parking brake. CPB kits are built primarily for front wheel drive vehicles, and select rear wheel drive axles that are not well suited for internal shoe style parking brakes. The calipers are coupled with oversized two-piece rotor assemblies with aluminum hats and high friction BP-10 compound pads. CPB kits provide the correct balanced brake performance and matching style to compliment front big brake upgrade kits.

Wilwood Website information of this specific product: CLICK HERE

PLEASE NOTE: FOR THIS KIT, YOU WILL NEED TO BUY A SPECIAL HAND BRAKE CABLE KIT FROM WILWOOD 330-10805. tHIS IS SEPERATELY AVAILABLE IN OUR SHOP