Skunk2 control arm & Camber kit PU bushings (universal)

Skunk2's redesigned, low-deflection, polyurethane bushings are available separately and are compatible with all Skunk2 Rear Lower Control Arms and Rear Camber Kits.

Important: Purchase includes two bushing halves. Each Rear Lower Control Arm and Rear Camber Kit mounting point requires two bushing halves.

Genuine Skunk2 polyurethane bushings act as bearings for quicker response and a more positive feel when compared to other manufacturers' bushings. Tearing and unseating problems normally associated with other fixed rubber bushings are eliminated by allowing the arm to rotate freely about the bushings. Fewer grooves within the inner diameter as well as special, radius-cut backsides help them last longer and avoid tearing and unseating. Thanks to the new design, bushing failures have been eliminated.

DO NOT INSTALL DRY - Requires White Lithium or other synthetic, water-resistant grease for Installation.

Do NOT use petroleum-based lubricant like WD-40 as using such will cause accelerated deterioration of bushing. When replacing worn bushings be sure to retain and reinstall the metal sleeve that installs inside of the bushings; we do not currently offer a replacement for them

Dimensions: 20mm ID 32mm OD.