M2 Sport Camber Kit rear (Honda Civic/CRX/Delsol/Integra 88-01)
90% of the products in our store are in internal or external stock and we can often process your order quickly (varying from a few hours to a number of business days).
Naturally it is possible that a product has an (unexpected) longer delivery time.
Upon receipt of your order, we will always inform you about this and offer any available alternatives. So keep a close eye on your mailbox.
We deliberately provide stock information about our products afterwards, because many suppliers do not offer a ''stock link system'' and we do not want to show '' estimates '' in advance, like many other webshops do (which are often incorrect and give you wrong information in advance). We only want to give our customers actual information on the moment of processing the order so we don't mislead our customers.
If you need a product VERY quickly and you need to be sure that we have it in stock, please e-mail or call us or send a message via ''ask a question about this product'' below in the product description.
M2 motorsport camber kit is specially designed for double-A suspension. Sophisticate design makes alignment more accurate. With the camber angle adjustment, the car will be more stable on the straight and has better control in the corner. The camber kit is made of light weight high strength materials with precise manufacture process. With many years of racing experience and numerous testing, The camber kit has extremely good performance and quality. The center section of the general camber kit is the weakest area; it could easily be distorted when the locking screw is tightening too hard. M2 motorsport Camber kit use the special reinforced solid design which dramatically increase the strength of the camber kit. By using low profile joint, the camber kit provides 5mm more clearance between the top of the camber kit and bottom of the strut tower. The low profile joint also featires cadmium plating for additional corrosion resistance. Standard camber kit does not have the reinforcement in the center area which can cause distortion when tightening the locking screw too hard or under severe stress. This may lead to accident or damage to other components on the vehicle.
M2 camber and toe kits provide adjustment from 0-3 inch.
