KW Suspension variant 3 coilovers incl. TUV (Honda Civic 2017+ 1.5 Turbo FK7)

If you have already made your first performance modifications to your vehicle our KW coilovers Variant 3 will compliment your upgrades. The patented KW-valve technology for separate adjustment of rebound and compression damping allows you to individually setup your suspension.The adjustable KW bottom valve adjusts the low-speed range of the compression level in twelve clicks.You don't need any adjusting tools because of the patented compression adjuster at the lower end of the stainless steel housing. The adjustable compression damping with its twelve exact clicks allows you to manually influence body roll, without having to change the spring rate which optimally matches the rebound.

With the individually adjustable rebound setup of the KW coilover Variant 3 "inox-line", you can directly influence the handling and comfort with its precise click adjustment. Depending on the vehicle type, the rebound valves of the KW twin-tube dampers on the upper end of the piston rod will be adjusted via an integrated adjustment wheel or a twist-adjustment wheel which is included in the delivery content.

You have the possiblity to adjust the dampers to your own requirements in rebound (16 clicks)
As with all KW coilovers our engineers develop vehicle specific damper settings which undergo comprehensive test cycles in the N"urburgring Nordschleife and on our KW 7-post driving dynamic centre. With a KW coilover kit the driving experience is more dynamic and direct. With 16 precise click you can adjust the KW dampers (firmer or more comfortable)

Depending on vehicle type, the rebound valves of the KW twin-tube dampers have to be adjusted at the upper end of the piston rod with an integrated adjustment wheel or the twist-adjuster which is part of the delivery content. By increasing the rebound force via the adjustment wheel, the body movements are reduced. Your car will stay in line and you will have more stability at increased corner speed.

-Rebound and compression damping adjustable damper technology
-Stainless steel technology "inox-line"
-Individual, continuous lowering
-T"UV-tested adjustment range
-High quality components for a long life
-Complete documentation for an easy handling
-Adjustable rebound damping with 16 exact clicks
-Adjustable compression damping with 12 exact clicks
-Unique, independent from each other working damping force adjustment

GOCA papers for Belgium are available on request.

Lowering: 25-45mm front 30-50mm rear.

Please note: With 52mm front shock diameter. Please check before ordering which size you have.

Excluding height regulator delete kit (if not installed, you will get a warning light on the dashboard).
Available seperately.