Exedy Stage 1 clutch kit + Flywheel kit (Honda Civic 2017+ 1.5 Turbo FK7/FL1)

EXEDY Stage 1 Racing Clutch Kit and lightweight flwyheel.

Organic Disc
Newly developed asbestos free friction facing is used, which has high heat resistance and high burst strength characteristics. No steel back is required which can cause high RPM "lock-out" and/or synchro damage. Superior in shift operations and half-engagement feel, this clutch disc is recommended for any sports/performance use.

Clutch Cover
These clutch covers are designed to achieve a clamping load that is approx. 40% higher than the genuine part allowing a higher torque transmitting capacity. Ductile material is used for all pressure plates and, high burst strength can be achieved in all temperature ranges.

The kit comes complete with the release bearing and a grease pack for the spline.

Maximum amount of torque: 450 Nm (on the flywheel)

-------------------

EXEDY Racing Flywheels are made from solid one piece billet chromoly steel forgings. They are specifically designed to reduce weight and inertia for better engine response.
Most incorporate special design features to enhance air flow to improve the cooling of the clutch.
The ring gear teeth are milled onto the flywheel unlike an aluminum flywheel where the ring gear is pressed onto the flywheel and have the possibility of separating from the flywheel.

Weight: 8.7 kg


Image is an example but you will receive a full kit as mentioned above.