
CoatedRaceBearings ACL Race thrust washers 50mm crankshaft (F22A/F22B/H22A/H23A engines)
90% of the products in our store are in internal or external stock and we can often process your order quickly (varying from a few hours to a number of business days).
Naturally it is possible that a product has an (unexpected) longer delivery time.
Upon receipt of your order, we will always inform you about this and offer any available alternatives. So keep a close eye on your mailbox.
We deliberately provide stock information about our products afterwards, because many suppliers do not offer a ''stock link system'' and we do not want to show '' estimates '' in advance, like many other webshops do (which are often incorrect and give you wrong information in advance). We only want to give our customers actual information on the moment of processing the order so we don't mislead our customers.
If you need a product VERY quickly and you need to be sure that we have it in stock, please e-mail or call us or send a message via ''ask a question about this product'' below in the product description.














Calico Coatings proudly partners with ACL and Mahle/Clevite to provide high-performance coated bearings for the motorsports industry.
Our ACL bearings are coated with our CT-1 or CT-11* Dry Film Lubricant coatings to help reduce friction and abrasive wear. It provides intermittent dry lubrication and is not affected by dust or dirt.
CT-1 is specifically engineered to withstand the extreme conditions of today's high-performance engines.
Professional engine builders enjoy a higher level of confidence with increased embeddability, strength and durability with Calico coated engine bearings.
The base of this product is a normale ACL race bearing, and has afterwards been coated with the Calico Coating.
Max overall Length 2, 489 mm / 0.0980 in
Max. wall at crown mm / 0.0000 in
Min. Std. Shaft size 57, 65 mm / 2.2697 in
Max. Std. Shaft size 57, 9 mm / 2.2795 in
Min. Std tunnel size 77.6 mm / 3.0551 in
Max. Std. Tunnel size 77, 85 mm / 3.0650 in
PLEASE NOTE: These are flange bearings for the 50mm crankshaft of a H/F serie engine. There are also 55mm crankshafts and you will need partnumber 1T1957 for the 55mm crankshaft. Please check the measurements before ordering carefully.