4PistonRacing upgrade Ölpumpe fitting satz (K20Z/K24A motor)

The stock oil pump is a great piece for up to 8,000 rpm. Past that, there can be cavitation issues and oil pressure drops as temperatures rise. Our ported pump increases flow by 25% and will allow continuous use above 9,000 rpm. The pump has been tested well over 11,000 rpm with great success. We start with a brand new OEM oil pump from Honda, disassemble, port and smooth oil passages to increase flow, and modify the outside housing so that it can be used on all K24 and K20 engines (including the K20Z3). The pumps are then cleaned, oiled, reassembled and repackaged. This part is cheap insurance to protect your multi-thousand dollar investment.

This pump has some advantages over the S2K pumps that are commonly used. The pickup is further forward, and lower in the pan, and it frees up an additional 1-2hp. This is the chosen pump for all of our racing engines for many of these reasons.

The Z3 and K24 need this kit to get the 4PR oil pump (4PR-KPUMP) fitted to the motor correctly.
This kit contains all Genuine Honda parts required to do this, so as always with Genuine Honda - expect a perfect fit and finish.

1x 13441-PCX-004

1x 13460-PNC-004

1x 95701-06025-08

1x 95701-08050-08

1x 95701-08075-08

6x 95701-06014-08

1x 90004-PE2-005